Showing posts with label connect Nodes. Show all posts
Showing posts with label connect Nodes. Show all posts

How to connect Nodes to Domain Controller.

You may have question how to Connect Node1 to DC ?

It is an easy task to perform, don't know why no one else created a proper blog about it.

First, you have to install 3 roles to the DC to make it Domain Controller and then it will be ready to add other nodes.

So the three roles are AD DC, DHCP, and DNS.

Add this three roles, then Promote your server as Domain controller create a Forest, give it a name and create NETBIOS.

Once it is done, go to Network adaptors settings and assign it a IP, you can assign class A, B or C, whichever you wish.

For example take class an IP address 10.1.10.1 and keep the default gateway and DNS server also the same.

Once you will assign the IP address now its time to set DHCP so that other computer will get the IPI addresses and will be able to connect to the domain.

So go to DHCP and right click on IPV4 and select New Scope option and create a scope and take range between 10.1.10.100 to 10.1.10.200.

Now we are done with the setting on DC.

Now need to connect Node one to the DC, so go back to the Node1 and in server manager select local server, in there click on manage IPV4 and now assign it any IP address which is within the scope and make the default gateway the IP address of the DC server.

Now go back to Server Manager click on Local Server and here click on "Workgroup" and change it to the domain name you had earlier assigned.

Now you will be able to connect the DC with the different nodes.

Found below video very useful to perform the above task and you can also proceed with performing clustering.

Video Courtesy : 

SrinathChowdary



Enter your email address:

Delivered by FeedBurner