Showing posts with label Nodes. Show all posts
Showing posts with label Nodes. Show all posts

How to configure NAT to share internet through DC to other nodes. Windows Server 2016

Sharing the internet through Domain Control to all other Workstation connected to it without much effort.

To configure sharing internet through one server to all the other machines in the network you need to configure NAT in Microsoft Windows Server 2012 and 2016.

So to do so you need to have two Lan Adapters installed on the Internet server.

Then install the Remote Access Server role. After installing it will ask for the prompt, just cancel that.

Go to the Routing and remote access here below server status you will be able to see the computer name of the local server which has the internet.

Now right click on it and select "Enable Routing and Remote Access" and then select option to make to do the customer configuration and create a LAN connection.

After it goes to the tools and select Windows Firewall and creates a new inbound rule to allow ping ICPSv4 to all the programs and computer.

Then come back to the Routing and Remote Access and here under the here right click on General under IPV4 and select create new routing interface select NAT.

After selecting NAT now its time to assign the interface, hence again right click on General and select the new interface and now select the external router which will be able to communicate with another machine in created routing mechanism.

Now you will be able to use the internet on all the computer associated within the domain.

And if you are using Hyper-V you will save a lot of time of adding the virtual switch. I found this video very helpful in doing the same if you are finding above instruction difficult you may watch below video: Video Courtesy: Professor Hornung

Enter your email address:

Delivered by FeedBurner